For my Faux Fulda project I need a lot of micro armor scale (6mm) trees. Having the woods adequately represented is even more important at this scale, (I'm using 1" = 100 meters), as a lot of the ground detail gets lost and the heavy woods help convey the importance of attacking through the Fulda Gap.
You can buy trees that are supposedly made for this scale, and I have som but I'm not overly happy with how they look and they aren't exactly cheap either. Given the number of trees I'm going to need I decided to tax my limited modeling skills and make my own. I made some pine trees using the quick tutorial over on Little Wars TV, and while they look ok, it wasn't really the look I was going for.
So, throwing common sense to the wind, I took stroll on the front deck of the house after a breezy day and started collecting supplies. Below is how I went about making these, I probably still need between 50 to 100 more.
I hate trying to paint tree trunks, so I opted for the easy route, and started picking up twigs from my yard. Finding the right look and diameter took a while.
For the leaves I used Reindeer Moss. I thought about using tree moss from the property, (we always have some laying around after heavy rain/wind) but wasn't sure how it would age. So I spent $10 on a couple of bags of moss.
The first 40 or so trees that I made were done using Elmer's Glue/white glue on the 'trunk' to attach the leaves.
That was more of a hassle than I wanted to deal with so I went to a hot glue gun. I've never been a big fan of hot glue guns, probably because I always used the cheap ones you can buy for under $5. It worked, but it was messy. I eventually upgraded and spent $12 on a variable temperature hot glue gun with a rather fine nozzle that allows some precision when applying the glue.Apply a ring of glue to the top of the 'tree trunk', apply the 'leaves' and you end up with this.
All it needs now is a base.Again, on the basing I took the cheap approach. I originally thought about ordering some round bases from Litko, but then I started figuring out what that would cost and decided I could come up with something that would work.
My solution was good old fashioned air drying modeling clay. I used the cap from a dried out magic marker, applied a little pressure to flatten the base a little (there is still an issue with the bases curling as they dry) and used a paint brush handle to make an indentation for the tree trunk/hot glue.
To give you an idea of the scale, here's a picture of a tank under the tree.
And to finish the tree, paint on a little water downed glue to the base and flock.
And there you go, simple, cheap trees.
Now I just need to repeat another 150 or so times.
Take care.
So much lead, so little time.
They look very presentable, and well suited to their role!
ReplyDeleteSomething to do for a rainy afternoon . The trees look good and I'm sure they'll fit the bill.
ReplyDeleteThank you Peter. They were definitely cheaper than buy a couple hundred trees.
ReplyDeleteThank you Joe. Making them was rather relaxing and a nice break from painting 6mm infantry.
ReplyDelete